The following test reports and approval can be obtain from a National Urethane Industries [Pty] Ltd representative on request :
INTERNAL & EXTERNAL PIPELINE RIGID POLYURETHANE COATING :
- Ultraspray 400B199 Cathodic Disbondment ASTM G08 30 days .
- Ultraspray 400B199 Water vapour transmission ASTM E-96.
- Ultraspray 400B199 Impact resistance T/SP/CW6:part 1 appendix F&H.
- Ultraspray 400B199 Cathodic Disbondment 95 degrees C 15 days @ -1.5 volts.
- Ultraspray 400B199 Cathodic Disbondment 80 degrees C 15 days @ -1.5 volts.
- Ultraspray 400B199 Adhesion results to blasted steel MPa.
- Ultraspray 400B199 Cathodic Disbondment ASTM G95 90 days @ -3 volts.
ULTRASKIN UNDERGROUND MINING ROCK CONSOLIDATION SPRAY COATING :
- Ultraskin 400-2003 Snowden Mining Industry Consultants risk analysis report.
- Ultraskin 400-2003 Smoke and toxicity NES 713.
- Ultraskin 400-2003 EFNARC panel test or French Rail test method report.
- Ultraskin 400-2003 UL 94 test results.
- Ultraskin 400-2003 Energy absorption capacity plate test.
- Ultraskin 400-2003 Inverted fire channel test results.
POLYUREA ELASTOMER SYSTEMS :
- Ultraspray 401-400 Abrasion test ISO 9352
- Ultraspray 401-200 Abrasion test ISO 9352
- Ultraspray 401-500 Abrasion test ISO 9352
- Ultraspray 401-400 Water vapour transmission ASTM E-96 [2000]
- Ultraspray 401-500 Water vapour transmission ASTM E-96[2000]
- Ultraspray 401-500 Water extract SANS 241:2006
- Ultraspray 401-200 Water vapour transmission ASTM E-96 [2000]
- Ultraspray 401-450 water vapour transmission ASTM E-96 [2000]
HYDROPHOBIC PAPER ROLL SPRAY SYSTEM :
- Ultraspray 400-140
- HDT after exposure to 120 degrees C [ISO 75]
-
HDT after exposure to 180 degrees C[ISO 75 ]
-
Compression set at 120 degrees C [ISO 815-1]
-
Compression set at 180 degrees C [ISO 815-1]
-
DMTA analysis at temperature range of 50 degrees C to 180 degrees C.
ULTRAFILL TYRE FILL :
- Ultrafill 70TF15 smoke and toxicity test NES 713 .
POLYSTYRENE /PU FOAM /CHROMA-DECK / PLYWOOD and NON STRUCTURAL ADHESIVES :
- Ultracast 70-200 adhesive test on various substrates ASTM D 3164.
- Ultrathane 520-024 adhesive test on various substrates ASTM D 3164
- Ultrathane 520-088 -accelerated degradation SANS 6032
- Break strength SANS 6043
- Detection of thermoplasticity SANS 6046
-
Wood failure percentage SANS 6033
-
Break strength SANS 10096
- Bending test SANS 10096
HOT CURE ELASTOMER LOAD WHEEL TEST [SPEED VERSUS LOAD] :
- Ultracast 10T95CM / MCDEA
- Ultracast 10T95CM / E300
- Ultracast 10T95CM / MBCA
- Ultracast CL 802 / MBCA
- Ultracast 10T90 / MCDEA
- Ultracast HT282 / MCDEA
STEEL BONDING PRIMER FOR COLD WALL EFFECT :
- Ultrat 760-007 cured with Ultrathane 500-208 - cold wall effect independent test results .
COLD CURE ELASTOMER :
- Ultracast 250-235 / 600D / 500-235M smoke and toxicity NES 713 .
- Cold Cure Elastomer - basic chemical resistant chart.
POLYBRON TEST RESULTS :
- Polybron 350-012 Moisture vapour transmission ASTM E-96
- Polybron 350 RDB 81/8 Moisture vapour transmission ASTM E-96
- Polybron 012 HBC compression set results.
- Polybron 350-012 Internal / external lining AS/NZS 4020:2002 potable water approval .
- Polybron 350-008 AS/NZS 4020:2005 testing of products for use in contact with drinking water [passed] .
- Polybron series - chemical resistant chart.
HOT CURE ELASTOMER :
- Chemical Resistance Chart
